Arduino-based Anatomy of the Talking Body Design for Children's Education

Alwi Firdaus; Yunita Subarwanti; Muhammad Putra Pamungkas

doi:10.55927/fjas.v4i2.8

Authors

Alwi Firdaus Universitas Nahdlatul Ulama Lampung
Yunita Subarwanti Universitas Nahdlatul Ulama Lampung
Muhammad Putra Pamungkas Politeknik Negeri Padang

DOI:

https://doi.org/10.55927/fjas.v4i2.8

Keywords:

IC555 Sensor, Sensory Apparatus, Anatomy, Education

Abstract

With the talking body anatomy tool for arduino-based children's education, children can interact directly so that the learning atmosphere is more fun. The design of this tool uses an IC555-based touch switch arranged in a matrix. An Arduino microcontroller is used to control all processes. The sound output uses an SD Card that can record sound for 120 seconds. Electricity leakage on the human body, which has a small current, can be used to trigger IC555 properly. Using an SD Card to record many messages is relatively easy because the addressing is used in parallel. Adding a digital circuit to expand the port can work well, because both have TTL voltage levels. SD Card sound recording equipment has good performance as a sound chip. Operation is relatively easy due to the parallel data communication addressing system and requires few additional external components.

References

Edon, C. D. H. (2022). Inovasi Alat Musik Sasando Elektrik. Rizmedia Pustaka Indonesia.

Firmansah, F. O. R. (2022). Rancang Bangun Otomatisasi Pengisian Air Galon Menggunakan Gripper Berbasis Arduino (Doctoral Dissertation, Politeknik Negeri Jember).

Handoko, P. (2017). Sistem Kendali Perangkat Elektronika Monolitik Berbasis Arduino Uno R3, In Seminar Nasional Sains Dan Teknologi 2017, P.11.

Junaedi, M. (2017). Paradigma Baru Filsafat Pendidikan Islam. Kencana.

M.F.Wicaksono, And M. Qhadafhi. (2019). Pengembangan Alat Pengenalan Bentuk Bangun Geometri Untuk Anak Usia Dini Berbasis Mikrokontroler, Ccit J., Vol. 12, No. 2, Pp. 186–196, 2019, Doi: 10.33050/Ccit.V12i2.689.

Mandala J, Dkk. (2020). Pemanfaatan Wash Timer Dan Ic 555 Sebagai Sebagai Saklar Pengaturan Waktu Pengairan Untuk Tanaman Berskala Kecil. Jurnal Teknologi, 14(2), 46- 55. Retrieved From.

S. M, (2019). Menggunakan Sensor Sentuh (Capasitive Touch Sensor) Pada Arduino, Indomaker.Com,2019.

Wahyuni, R., Dkk. (2020). Rancang Bangun Kran Wudhu Otomatis Dan Pengisian Tank Air Otomatis Pada Stmik Hang Tuah Pekanbaru Berbasis Arduino Uno, -Jurnal Ilmu Komputer, 2020jik.Htp.Ac.

Wirajaya, M.R., Dkk. (2020). Rancang Bangun Mesin Penetas Telur Otomatis Menggunakan Mikrokontroler Arduino Uno, - Jambura Journal O, 2020 -Ejurnal.Ung.Ac.Id.

Yami, A. (2011). Penggunaan Rangkaian Multivibrator Sebagai Saklar Sentuh. Jurnal Saintikom, - Prpm.Trigunadharma.Ac.Id Seminar Nasional Nciet (Vol. 1, No. 1, Pp. 84-92).